Tube Laser Cutting

Our FabriGear series laser-cutting machine from Mazak is a three-dimensional laser-processing tool designed to process a full range of tubes and structures.


The machine makes loading raw material into the loading station simple and automatically delivers finished parts to the unloading station. Our tube laser’s unique 3D cutting head allows for unsurpassed cutting accuracy at any angle for the best part fit and weld preparation.

Specifications

Wall Thickness

0.75″ maximum on straight cuts
0.50″ on bevel cuts
Maximum bevel is 50º
____________________________

Small Parts Catcher

Can handle parts up to 27.5″; larger sizes require manual unloading

Length

49′ – 0″ maximum ____________________________

Drawings

Solid model tubing data can be imported directly via 3D .iges, .sat and .step file formats. Manually inputting the tube info, the software is possible but requires more time

Conveyor Setup

Can queue up to 5 pieces of varying material sizes/lengths at a time
____________________________

Tolerances

Are similar to laser table tolerances: +/-0.031″ to +/-0.010″ depending on material

Round Pipe

Min Diam: 0.79″
Max Diam: 16″
____________________________

Square/Rect. Tube

Min Diam: 0.79″ x 0.79″
Max Diam: 12″ x 12″

Channel

Min Diam: 0.79″ x 0.79″
Max Diam: 10″ x 10″
____________________________

Angle

Min Diam: 0.79″ x 0.79″
Max Diam: 10″ x 10″

Wide Flange

Min Diam: 0.79″ x 0.79″
Max Diam: 6.5″ x 6.5″
____________________________

Other Shapes

Min Diam: 0.79″ x 0.79″
Max Diam: 10″ x 10″